MikroTik RouterOS v6.38.1 publicado

Se ha publicado el release v6.38.1 del RouterOS con una lista de arreglos principalmente de los últimos agregados.

La lista de cambio es:

What's new in 6.38.1 (2017-Jan-13 05:51):

*) bridge - disallow manual removal of dynamic bridge ports;
*) bridge - fixed MAC address learning from switch master-port;
*) bridge - fixed access loss to device through bridge if master port had a loop (introduced in v6.38);
*) certificate - added year cap (invalid-after date will not exceed year 2039);
*) certificate - fixed fail on import from CAPs when both key and name already exist;
*) dhcpv6-client - fixed DHCPv6 rebind on startup;
*) dhcpv6-server - fixed server removal crash if static binding was present;
*) dns - fixed typo in regexp error message;
*) dude - (changes discussed here: http://forum.mikrotik.com/viewtopic.php?f=8&t=112599);
*) fan - improved RPM monitor on CCR1009;
*) firewall - nat action "netmap" now requires to-addresses to be specified;
*) health - report fan speed for RB800 and RB1100 when 3-pin fan is being used;
*) ike1 - fixed ph1 rekey in setups with mode-cfg;
*) ike2 - allow empty selectors to reach policy handler;
*) ike2 - auto-negotiate split nets;
*) ike2 - default to tunnel mode in setups without policy;
*) ike2 - fixed error packet from initiator on responder reply;
*) ike2 - fixed initiator TS updating;
*) ike2 - fixed ph1 initial-contact rare desync;
*) ike2 - fixed policy setting for /0 selector with different address families;
*) ike2 - fixed split policy active flag;
*) ike2 - fixed traffic selector prefix calculation;
*) ike2 - fixed xauth add check;
*) ike2 - include identity in peer address info;
*) ike2 - log empty TS payload;
*) ike2 - minor logging update;
*) ike2 - show peer identity of connected peers;
*) ike2 - traffic selector improvements;
*) ike2 - update also local port when peer changes port;
*) ike2 - use first split net for empty TS;
*) ike2 - use standard retransmission timers for DPD;
*) ike2 - xauth like auth method with user support;
*) ipsec - added ability to kill particular remote-peer;
*) ipsec - fixed flush speed and SAs on startup;
*) ipsec - fixed peer port export;
*) ipsec - port is used only for initiators;
*) ipv6 - added warning about having interface MTU less than minimal IPv6 packet fragment (1280);
*) license - fixed demo license expiration after installation on x86;
*) log - improved firewall log messages when NAT has changed only connection ports;
*) logs - work on false CPU/RAM overclocked alarms;
*) mpls - fixed crash on active tunnel loss in MPLS TE setups;
*) ovpn - fixed address acquisition when ovpn-in interface becomes slave;
*) proxy - fixed "max-cache-object-size" export;
*) proxy - speed-up almost empty disk cache clean-up;
*) quickset - various small changes;
*) rb751u - fixed ethernet LEDs (broken since 6.38rc16);
*) ssh - fixed high memory consumption when transferring file over ssh tunnel;
*) webfig - show properly large BGP AS numbers;
*) winbox - added "make-static" to IPv6 DHCP server bindings;
*) winbox - added "prefix-pool" to DHCPv6 server binding;
*) winbox - added IPsec to radius services;
*) winbox - added upstream flag to IGMP proxy interfaces;
*) winbox - allow to specify "connection-bytes" & "connection-rate" for any protocol in “/ip firewall” rules;
*) winbox - allow to specify "sip-timeout" under ip firewall service-ports;
*) winbox - do not create empty rates.vht-basic/supported-mcs if not specified in CAPsMAN;
*) winbox - hide "nat-traversal" setting in IPsec peer if IKEv2 is selected;
*) winbox - show dynamic IPv6 pools properly;
*) winbox - show errors on IPv6 addresses;
*) winbox - specify metric for “/ip dns cache-used” setting;
*) wireless - show comment on "security-profile" if it is set;

Puede ser descargado desde el sitio de MikroTik en la sección descargas o desde el Winbox en System > Packges.